Home > News > Machine Delivery: Decoiler Straightener Feeder >

HongEr 2 Sets Of NC Servo Feeder Was Ready For Shipping To Poland And Thailand

HongEr 2 Sets Of NC Servo Feeder Was Ready For Shipping To Poland And Thailand
Issue Time:2019-06-27

HongEr 2 Sets Of NC Servo Feeder Was Ready For Shipping To Poland And Thailand

RNC-600 for our customer in Poland
RNC-300 for our customer in Thailand

The metal coil servo feeder is suitable for feeding the coil sheet thickness thickness up to 6.0mm, with max. feeding speed 20m/min.

It's Yaskawa servo system ensure a high precision feeding at accuracy of feeding pitch +/- 0.1mm. The feeding rollers are treated by heat treatment and electroplated with chrom to realize hardness 60-62° of surface. 

The feeding pitch can be set up by 9 sections.

It is easy to operate with pneumatic release, and low cost for maintenance.


What does this machine use for?

It is often equipped with decoiler, straightener machine with mechanical press in metal stamping line:

Uncoiler machine + straightener machine + servo coil feeder + press machine